SL-200JG Reversible Bolt Lock

SL-200JG Reversible Bolt Lock

Description

LINBOX bolt locks are an alternative to the electric strikes commonly used in access control systems, or a complement to them in openings that require additional electromechanical security. A bolt lock consists of an actuator containing an electromagnet that, when voltage is applied, extends or retracts a movable bolt (depending on the lock type). The main unit is mounted in or on the door frame. The movable bolt enters a prepared hole in the door leaf, locking it against opening. Depending on the lock model, the maximum force on the door at which the bolt can be sheared off is 800 or 1000 kg.

Bolt locks are available in both a standard version (NC, door locked with no power) and a reversible version (NO, door unlocked with no power, door secured once power is applied)

Auto-lock

The bolt lock is equipped with an automatic locking system. If, after the control signal triggers and the lock releases, the door is not physically opened, it will lock again after about 9 seconds from the end of the control pulse.

Time delay

The lock lets you set a time delay after which it will lock the door. This time can be set using the microswitches inside the lock housing. Available settings: 0 / 3 / 6 seconds of delay after the door-open control signal is released.

Lock status

2 additional wires (white, yellow) are used to check whether the door is closed or not.

An EXIT button can be connected to the (black, blue) wires.

Specification

Lock type

NO (reversible, door unlocked with no power)

Max. force on door

800 kg

Power supply 12V DC

Current draw, in operation (momentary draw) 900mA/12V

Current draw, standby 130mA/12V

Time delay 0, 3, 6 seconds

Auto-lock approx. 9 seconds

Lock dimensions 205 x 35 x 41 mm

Mounting plate dimensions 90 x 25 x 2 mm

Operating temperature -10～+55°C

Relative ambient humidity 0~90% (non-condensing)