Wireless PIR Motion Sensor

🚨 Wireless PIR Motion Sensor 433 MHz | Adjustable Sleep Mode | Low Battery Alarm

The wireless 433 MHz PIR motion sensor is designed to detect human movement and work with compatible alarm control panels. Once movement is detected, the sensor sends a signal to the control panel, which, if the system is armed, can trigger the siren and send an SMS notification or make a phone call.

The model is fitted with automatic temperature compensation, a low battery alarm and a smart energy-saving system, with an adjustable sleep time after movement is detected.

⭐ Key benefits

• ✔ Wireless 433 MHz communication
• ✔ PIR motion detection technology
• ✔ Detection range up to 12 metres
• ✔ Wide 110° detection angle
• ✔ Automatic temperature compensation
• ✔ Low battery alarm
• ✔ Energy-saving mode
• ✔ Adjustable sleep time: 5s / 50s / 5min
• ✔ ON / OFF switch
• ✔ Simple installation, no cable to the control panel needed

👤 Effective PIR motion detection

The sensor uses PIR (Passive Infrared) technology to detect human movement in the protected area.

With a detection range of up to 12m and a detection angle of 110°, the device lets you monitor a large part of a room.

Once movement is detected, the sensor sends a signal to the paired control panel. The further response, such as triggering the siren, sending an SMS or making a call, depends on the control panel's functions and configuration.

🔋 Smart battery-saving system

One of this sensor's key features is its adjustable sleep mode. After detecting movement, the device can enter a temporary sleep state, reducing the number of unnecessary transmissions to the control panel.

Using a jumper you can set the sleep time to:

• ⏱️ 5 seconds
• ⏱️ 50 seconds
• ⏱️ 5 minutes

This is especially useful in rooms where there's frequent movement. When the system is disarmed, the sensor doesn't need to send another signal every time it detects movement, helping save energy.

🌡️ Automatic temperature compensation

The sensor is fitted with automatic temperature compensation, which supports correct detector operation in changing ambient conditions.

It also has a low battery alarm function to help you react in good time to a drop in power level.

🔘 ON / OFF switch

The built-in on/off switch lets you temporarily disable the sensor without having to remove it.

This is a convenient solution during servicing work, when changing the mounting location, or when temporarily disabling a chosen detection zone.

🔧 Simple installation

Before use, the sensor must be paired with a compatible alarm control panel.

The device is then mounted on the wall at the recommended height of 2.2-2.5 m. Correct positioning lets you make the most of the wide detection angle and range of up to 12 metres.

Thanks to wireless communication, there's no need to run a signal cable between the sensor and the control panel.

⚙️ Technical specification

Device type Wireless PIR motion sensor Detection technology PIR Communication Wireless Frequency 433 MHz Motion detection range Up to 12 m Detection angle 110° Recommended mounting height 2.2-2.5 m Temperature compensation Automatic Low battery alarm Yes Energy-saving mode Yes Sleep time 5s / 50s / 5min ON / OFF switch Yes

🏠 Applications

The sensor can be used as part of a compatible alarm system in:

• 🏠 houses and flats,
• 🏢 offices,
• 🏪 shops and business premises,
• 🚗 garages,
• 🏭 warehouses,
• 🏡 holiday cottages.

➕ Extend your alarm system

The sensor can be part of an extended alarm system working with compatible 433 MHz accessories, such as:

• ✔ door and window sensors,
• ✔ additional motion sensors,
• ✔ smoke and gas sensors,
• ✔ flood and shock sensors,
• ✔ remotes and SOS buttons,
• ✔ wireless sirens.

The 433 MHz wireless PIR sensor with adjustable sleep time is a practical solution for anyone who wants effective motion detection combined with efficient battery use and convenient operation.