Pulse Car Battery Charger 12V 24V 30A

This is a smart charger for the most common 12V and 24V batteries used in automotive and industrial applications.

It works with most batteries on the market: including wet batteries / dry batteries / lead-acid batteries / maintenance-free batteries / gel batteries / lithium-ion batteries / AGM start-stop batteries

It also has a fast-charging function.

Product features

• microprocessor-controlled
• for the most common 12V and 24V batteries (wet battery / dry battery / lead-acid battery / maintenance-free battery / gel battery / lithium-ion battery / AGM start-stop battery)
• charging and repair mode
• option to manually adjust the charging current
• for charging car and motorcycle batteries
• compact and easy to store
• fast-charging function
• feel safe on every trip
• automatic selection - 12V and 24V
• uses very little electricity
• handle with finger grip

A Compact Car Battery Charger - for Most Batteries on the Market

Used for charging car, motorcycle and lead-acid batteries from 10-300Ah. It automatically detects the charging current at 12V or 24V depending on the battery being charged. The charger is compact, making it easy to carry and store!

Product specification

• colour: black-red
• material: metal
• charging time: 4-6 h
• intended for batteries: 12 and 24V
• maximum current: 30A
• dimensions (W/H): 26.5/19cm
• weight: 2.05kg
• weight with packaging: 2.50kg

Automatic 12-24V detection

The device automatically detects the battery voltage, and sets the correct value at 12V or 24V before charging, depending on what's needed. It easily charges common car batteries, motorcycle batteries and many others. It's highly effective, efficient, and uses very little electricity.

How to charge a battery?

1. Connect the RED charging clamp to the + POSITIVE terminal on the battery.

2. Connect the BLACK charging clamp to the - NEGATIVE terminal on the battery (when charging a battery in a vehicle, we recommend connecting the BLACK charging clamp to the engine block).

3. Set the correct battery type and operating mode

4. Plug the charger into the mains

7-stage charging

STAGE 1: Desulphation: detects a sulphated battery, charging with a pulsed current of low voltage and high amperage helps remove sulphate from the battery plates, restoring its original capacity.

STAGE 2: Soft start: if the battery isn't damaged, charging begins with a relatively low current (about 15%), gradually increasing.

STAGE 3: Bulk charge constant-current charging, voltage increases to the maximum

STAGE 4: Absorption charge - The battery is charged at the configured absorption voltage, with the charging current slowly dropping as the battery approaches full charge.

STAGE 5: Battery test: a roughly 2-minute test of the battery's charge level. If the charge level doesn't drop after charging stops, the charging process ends.

STAGE 6: Regenerative charge - used in the final charging phase

STAGE 7: Float and maintenance charge - once the battery is fully charged and balanced, it returns to the starting voltage, which is the current balance point for the battery being charged

Charge and repair function

Besides the standard charging mode, the device also has a repair mode.

Repair mode is an advanced recovery mode for old, unused, damaged, delaminated or sulphated batteries.

Note: not every battery can be repaired.

Displaying charging parameters

Gives you extra control over your battery's condition. The large display shows the current charging amperage, charging mode and current battery voltage. You can also see the charge level shown as a percentage.

Very high charging efficiency at positive temperatures. Thanks to advanced control of the charging process, the charger's efficiency is 98%, which makes it far superior to traditional chargers without this kind of technology.