Car Battery Charger 24V 12V 25A AGM Start-Stop

Pulse Car Battery Charger for 12V 24V Batteries 25A

This is a smart charger for the most popular 12V and 24V batteries used in the automotive and industrial sectors.

It supports most batteries available on the market: wet battery / dry battery / lead-acid battery / maintenance-free battery / gel / lithium-ion / AGM start-stop

It also features a fast charging function.

KEY FEATURES:

• Microprocessor-controlled
• For the most popular 12V and 24V batteries (wet battery / dry battery / lead-acid battery / maintenance-free battery / gel / lithium-ion / AGM start-stop)
• Charging and repair mode
• Manual charging current adjustment
• For charging car and motorcycle batteries
• Handy and easy to store
• Fast charging function
• Feel safe on every journey
• Automatic selection, 12V and 24V
• Uses very little electricity
• Handle with finger grips

Compact Car Battery Charger, for Most Batteries on the Market

Used for charging car, motorcycle and lead-acid batteries from 10-250Ah. Automatically detects whether to charge at 12V or 24V depending on the battery. The charger has a compact size, making it handy and easy to store!

SPECIFICATION:

• Colour: black-orange
• Material: metal
• Charging time: 4-6 h
• Intended for: 12 and 24V batteries
• Maximum current: 25A
• Dimensions (W/H): 26.5/19cm
• Weight: 2.05kg
• Weight with packaging: 2.50kg

AUTOMATIC 12V/24V DETECTION

The device automatically detects the battery voltage, setting the correct 12V or 24V value before charging as needed. It easily charges popular car, motorcycle and many other batteries. It is extremely efficient, effective and uses very little electricity.

HOW TO CHARGE THE BATTERY?

1. Connect the RED charging clamp to the + POSITIVE terminal on the battery.

2. Connect the BLACK charging clamp to the - NEGATIVE terminal on the battery (when charging a battery in a vehicle, we recommend connecting the BLACK charging clamp to the engine block).

3. Set the correct battery type and operating mode

4. Plug the charger into the mains

7-STAGE CHARGING

STAGE 1: Desulphation: detects a sulphated battery; charging with a low-voltage, high-current pulsed current removes sulphate from the battery plates, restoring its original capacity.

STAGE 2: Soft start: if the battery isn't damaged, charging begins with a relatively low current (approx. 15%), gradually increasing.

STAGE 3: Bulk charging, constant-current charging, voltage increases to the maximum

STAGE 4: Absorption charging, the battery is charged at the configured absorption voltage, with the charging current slowly decreasing as the battery approaches full charge.

STAGE 5: Battery test: a roughly 2-minute charge test; if the battery's charge level doesn't drop after charging stops, the charging process is complete.

STAGE 6: Regenerative charging, used in the final charging phase

STAGE 7: Float and maintenance charging, once the battery is fully charged and balanced, it returns to the initial voltage, which is the current equilibrium point for the battery being charged

REPAIR AND CHARGING FUNCTION

Besides the standard charging mode, the device has a repair mode.

Repair mode is an advanced mode for reviving old, unused, damaged, delaminated or sulphated batteries.

Note: Not every battery can be repaired.

CHARGING PARAMETER DISPLAY

Gives you extra control over your battery's condition. A large display shows the current charging current, mode, and the battery's current voltage. You can also see the state of charge as a percentage.

Very high charging efficiency at positive temperatures. Thanks to advanced charging process control, the charger's efficiency is 98%, making it incomparable to traditional chargers without this kind of technology.