{"product_id":"multiswitch-5-wejsc-24-wyjsc-linbox-5x24-kaskada","title":"5-Input 24-Output Multiswitch Linbox 5x24 Cascade","description":"\u003ch2\u003e5-INPUT 24-OUTPUT CASCADE MULTISWITCH LINBOX SATELLITE\u003c\/h2\u003e\n\u003ch2\u003eA wide selection of branded satellite multiswitches.\u003c\/h2\u003e\n\n\u003ch2\u003eLINBOX Multiswitch 5\/24 for 1 Satellite with Passive Terrestrial TV Path\u003c\/h2\u003e\n\u003cp\u003eCascade version for connecting an additional multiswitch in a cascade chain.\u003c\/p\u003e\n\u003cp\u003eRecommended for installations of up to 24 tuners from 1 satellite, e.g. Hotbird\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey features:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 1x4 from a Quattro converter, 1 terrestrial DVB-T,\u003c\/li\u003e\n\u003cli\u003eOutputs: 24 to SAT tuners,\u003c\/li\u003e\n\u003cli\u003eOutputs: 1x4 from SAT, 1 terrestrial DVB-T,\u003c\/li\u003e\n\u003cli\u003ePassive FM\/DVB-T path\u003c\/li\u003e\n\u003cli\u003eInput frequency range: for satellite LNB inputs: 950 - 2150 MHz,\u003c\/li\u003e\n\u003cli\u003eInput frequency range: for the terrestrial DVB-T antenna input: 47 - 862 MHz,\u003c\/li\u003e\n\u003cli\u003eFrequency range for outputs to end sockets: 47-2150 MHz,\u003c\/li\u003e\n\u003cli\u003eAttenuation in the SAT band (950-2150 MHz): -6 dB, attenuation in the TER band (47-862 MHz): -4 dB,\u003c\/li\u003e\n\u003cli\u003eOutput signal level: RTV approx. 85 dBuV; SAT approx. 100 dBuV, isolation between outputs approx. 25-30 dB,\u003c\/li\u003e\n\u003cli\u003ePower supply: 18V 3A DC from an external 90-240V(AC), 40-60Hz power adapter,\u003c\/li\u003e\n\u003cli\u003eThe multiswitch works with Quattro-type converters and terrestrial TV antennas,\u003c\/li\u003e\n\u003cli\u003eThe multiswitch automatically detects the type of signal (band, polarisation) to be delivered to each tuner,\u003c\/li\u003e\n\u003cli\u003eThe device is designed for indoor use (attic, hallway, basement, etc.), operating temperature from 0 to +55°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBranded multiswitches. Single-satellite series. From 4 to 32 outputs.\u003c\/h2\u003e\n\n\u003ch2\u003ePower adapter\u003c\/h2\u003e\n\u003cp\u003eThe set includes a 20V 1.2A power adapter with an F-type connector. A lit LED on the power adapter indicates that the multiswitch is being powered correctly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eThe multiswitch has 5 inputs and 24 outputs.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe top of the multiswitch has 5 inputs for connecting the signal from 1 satellite and from a terrestrial antenna. The four inputs for connecting the Quattro converter are marked Vert\/Lo, Horz\/Lo, Vert\/Hi, Horz\/Hi respectively, and must be connected to the identically marked outputs on the converter. The middle input, marked ANT, is used to connect the signal from the terrestrial antenna. The cascade version has 4 SAT outputs and 1 DVB-T output for connecting an additional multiswitch.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIndicating correct operation of the multiswitch.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThere is an LED at the power adapter input; when lit, it indicates that the multiswitch is being powered correctly.\u003c\/p\u003e\n\u003cp\u003eThere are also LEDs at each output for connecting a tuner. If the LED is lit, it means a tuner is connected to that output and is switched on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eThe multiswitch and power adapter are fitted with power status LEDs. Under correct operation, both should be lit.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eIf, after connecting the terrestrial antenna and switching on the power, the LEDs on the power adapter and multiswitch flicker, this indicates a short circuit. Switch off the power immediately and remove the cause.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eMultiswitch outputs.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eOn the left and right sides, the multiswitch has 24 outputs for connecting up to 24 satellite or terrestrial tuners. If a receiver has a recording function, you need to connect 2 cables from the multiswitch to it. In that case, you can connect up to a maximum of 12 such receivers.\u003c\/p\u003e\n\n\u003ch2\u003eEverything comes packed in a blue box.\u003c\/h2\u003e\n\u003cp\u003eThe set includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMultiswitch 5\/24, cascade version\u003c\/li\u003e\n\u003cli\u003e20V 1.2A power adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Linbox","offers":[{"title":"Default Title","offer_id":58236890153292,"sku":"5907222214244","price":88.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1077\/7765\/5116\/files\/c402f37e426c8ee885bf87c8f32a9af6.jpg?v=1785238578","url":"https:\/\/linbox.store\/en-de\/products\/multiswitch-5-wejsc-24-wyjsc-linbox-5x24-kaskada","provider":"Linbox","version":"1.0","type":"link"}